Cannondale 2011 Road Park City. Oversized at BB for torsional rigidity. 4 Asymmetric chain stays optimize power transmission. The Hollowgram Si SL crankset. Car & Truck Manual Transmission. FSA SL-K Light Compact Carbon Road Bike Crankset EVO386 34/50T 170mm No BB. Cannondale Hollowgram Si Crankset 50/34 FSA rings. And the GoCycle manual states. Transmission - Patented Cleandrive® Shimano Nexus 3-speed. Cannondale Hollowgram Si Bottom Bracket & Crank.

Start display at page:
Download 'F-SI OWNER S MANUAL SUPPLEMENT CANNONDALE UK. CANNONDALE EUROPE Cycling Sports Group Europe, B.V. Hanzepoort 27, 7570 GC, Oldenzaal, F-SI'
  • Flora Norris
  • 2 years ago
  • Views:

Transcription

1 Warning! Read this supplement and your cannondale bicycle owner s manual. Both contain important safety information. Keep both for future reference CANNONDALE EUROPE Cycling Sports Group Europe, B.V. Hanzepoort 27, 7570 GC, Oldenzaal, Netherlands (Voice): (Fax): CANNONDALE UK Cycling Sports Group Vantage Way, The Fulcrum, Poole, Dorset, BH12 4NU (Voice): +44 (0) (Fax): +44 (0) Cycling Sports Group (06/14) OWner s manual Supplement F-SI F-SI OWNER S MANUAL SUPPLEMENT

2 About This Supplement Cannondale Owner s Manual Supplements provide important model specific safety, maintenance, and technical information. They are not replacements for your Cannondale Bicycle Owner s Manual. This supplement may be one of several for your bike. Be sure to obtain and read all of them. If you need a manual or supplement, or have a question about your bike, please contact your Cannondale Dealer immediately, or call us at one of the telephone numbers listed on the inside cover of this supplement. You can download Adobe Acrobat PDF versions of any Cannondale Owner s Manuals or Supplements from our website: Please note that the specifications and information in this manual are subject to change for product improvement. For the latest product information, go to Explicit Definitions In this supplement, particularly important information is presented in the following ways: WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Contents PDF SAFETY INFORMATION..2 TECHNICAL INFORMATION Replacement Parts Maintenance..12 Your Cannondale Dealer To make sure your bike is serviced and maintained correctly, and that you protect applicable warranties, please coordinate all service and maintenance through your authorized Cannondale Dealer. NOTICE Unauthorized service, maintenance, or repair parts can result in serious damage and void your warranty. EN NOTICE Indicates special precautions that must be taken to avoid damage. ASTM F2043 For rough off-road riding and jumps less than 24 (61 cm) The intended use of all models is ASTM CONDITION 3, Cross- Country. p/n Revision A, 08/14 1

3 SAFETY INFORMATION Important Composites Message WARNING Your bike (frame and components) is made from composite materials also known as carbon fiber. All riders must understand a fundamental reality of composites. Composite materials constructed of carbon fibers are strong and light, but when crashed or overloaded, carbon fibers do not bend, they break. For your safety, as you own and use the bike, you must follow proper service, maintenance, and inspection of all the composites (frame, stem, fork, handlebar, seat post, etc.) Ask your Cannondale Dealer for help. We urge you to read PART II, Section D. Inspect For Safety in your Cannondale Bicycle Owner s Manual BEFORE you ride. YOU CAN BE SEVERELY INJURED, PARALYZED OR KILLED IN AN ACCIDENT IF YOU IGNORE THIS MESSAGE. Inspection & Crash Damage Of Carbon Frames/Forks WARNING AFTER A CRASH OR IMPACT: Inspect frame carefully for damage (See PART II, Section D. Inspect For Safety in your Cannondale Bicycle Owner s Manual. ) Do not ride your bike if you see any sign of damage, such as broken, splintered, or delaminated carbon fiber. ANY OF THE FOLLOWING MAY INDICATE A DELAMINATION OR DAMAGE: An unusual or strange feel to the frame Carbon which has a soft feel or altered shape Creaking or other unexplained noises, Visible cracks, a white or milky color present in carbon fiber section Continuing to ride a damaged frame increases the chances of frame failure, with the possibility of injury or death of the rider. 2

4 PDF TECHNICAL INFORMATION B P G O A E D EN M K L J H I N Geometry SIZE SM MD L XL A SEAT TUBE LENGTH (CM/IN) 38.5 / / / /21 B TOP TUBE HORIZONTAL (CM/IN) 57.3 / / / /25.5 C TOP TUBE ACTUAL (CM/IN) 55.2 / / / /24.1 D HEAD TUBE ANGLE 69.5 h h h E SEAT TUBE ANGLE EFFECTIVE F STANDOVER (CM/IN) 76.8 / / / /33.5 G HEAD TUBE LENGTH (CM/IN) 9.7 / / / /4.8 H WHEELBASE (CM/IN) / / / /45.2 I FRONT CENTER (CM/IN) 65.2 / / / /28.4 J CHAIN STAY LENGTH (CM/IN) 42.9 /16.9 h h h K BOTTOM BRACKET DROP (CM/IN) 6.2 /2.4 h h h L BOTTOM BRACKET HEIGHT (CM/IN) 30.8 /12.1 h h h M FORK RAKE (CM/IN) 5.5 /2.2 h h h N TRAIL (CM/IN) 7.9 / / / /3 O STACK (CM/IN) 60.2 / / / /24.7 P REACH (CM/IN) 39.2 / / / /18 3

5 Specifications Headtube Chainline Cannondale Si (see also Replacement Parts for conversion kits) 55 mm BB Shell/ Width PF30/83mm Seat Post Diameter Front Derailleur Dropout Spacing Rear Brake 27.2mm Direct Mount 135mm Post Mount Please read your Cannondale Bicycle Owner s Manual for more WARNING information on the following specifications: Intended Use ASTM CONDITION 3, Cross-Country, Marathon, Hardtails. Maximum Tire Width 2.25 Maximum Fork Length 500 mm Minimum Seat Post Insert 100 mm Maximum Weight Limit (Lbs/Kg) *(Seat Bag Only) RIDER LUGGAGE* TOTAL 300 / / / 138 Integrated Headtube In carbon models, cups are bonded within the head tube. Cannondale Headshok System Integration bearings are accepted directly into both type. For 1.5 and 1 1/8 adapter headsets, see Replacement Parts. NOTICE Do not face, surface, or cut the head tube bearing cups. When removing adapters, bearings, or cup from the frame, extra care must be used so that the tool used to drive out the bearing is not located on any part a bonded cup. X QSISEAL/ BEARING SEAL HD169/ BEARINGS FRAME SIZE SM MD LARGE X-LARGE HEADTUBE LENGTH (X) 97mm 109mm 122mm 134mm 4

6 PDF ASYMMETRIC Integration (Ai) - Rear Wheel About You must use rear wheels that are compatible with the Cannondale Asymmetric Integration (Ai) 6mm offset. OEM wheels built to this specification are identified with Ai logo, shown at right. 6mm Offset / 55mm Chainline (Ai trademark logo) CENTERLINE OF FRAME EN The Ai rear hub is offset 6mm to the drive side. This both aligns the cassette with the Ai frame s 55mm chainline, and aligns the rim/tire with frame s centerline for correct tire clearance. (See also, Maximum Tire Width in SPECIFICATIONS). Ai wheels have equal spoke angles and tension on both sides (non-dished wheel) which improves wheel stiffness, strength. TIRE RIM NOTICE SPOKES USE ONLY Ai OFFSET REAR WHEELS. Incorrect wheel offset can damage your frame. CASSETTE Standard wheel assembled on this frame will result in insufficient tire clearance leading to rubbing and serious frame damage. This kind of damage is not covered by the Cannondale Limited Warranty. Building/Truing a Wheel If you chose to build, or true the wheel, make sure the 6mm offset is present. Consult with your Cannondale Dealer if you have any questions. WHEEL HUB NON-DRIVE 6mm DRIVE 55mm 135mm dropout center 5

7 SEAT POST 4Nm, 35InLbs 5Nm, 44InLbs Please Note: The seatpost size is 27.2mm. Do not use adapters or shims. The seatpost MINIMUM INSERT depth is 100mm. The frame INSERT LIMIT varies with frame size. Do not allow an installed seatpost to touch the water bottle boss. This will result in damage. Apply carbon gel inside the seat tube and on the seat post before inserting the seatpost. Apply a light bicycle bearing grease to the area of seat post under the binder. 100mm For more information about carbon fiber seat posts, see also APPENDIX D. Care and Maintenance of Carbon Fiber Seat Posts in your Cannondale Bicycle Owner s Manual. WARNING THE SEAT POST MUST ONLY BE CUT BY A PROFESSIONAL BIKE MECHANIC. Incorrectly cutting the seat post can result in damage leading to an accident. 6

8 PDF Bottom Bracket - PF30/83mm BEARING PF30 CUP EN KP197/ 2X (PF30) 83mm Cup/Bearing Installation Thoroughly clean the inside surface of the bottom bracket shell with a clean dry shop towel. Apply bearing grease** to the BB shell and cup. Press each cup individually with the headset press until the cup flange is mated with the BB shell face. Apply bearing grease to each bearing and press one at a time into the already installed cups. Removal To avoid damage to the frame, drive out bearing out of the installed cup. Then, drive out each bearing cup. Drive both the bearings and cups out squarely and evenly. Do not pry components from shell. Maintenance In general, you should inspect the condition of the BB bearings annually (at a minimum) or anytime the crankset assembly is disassembled, serviced, or if a problem is indicated. To inspect, when the crankset is removed, rotate the inner bearing race of both bearings; rotation should be smooth, and quiet. Execesssive play, roughness or corrossion indicates a damaged bearing. Do not reinstall removed bearings or cups. Replace both cups/bearings as a new set. NOTICE Consult with your Cannondale Dealer on the quality and compatibilty of any proposed replacement component. Make sure the PRESSFIT BB30 30 system is intended for use with a 46 mm I.D. BB shell. Confirm acutel part dimensions with a micrometer. Do not use chemical solvents to clean. Do not remove frame material or use surfacing tools on bottom bracket shell. Frame damage, caused by improper components, component installation or removal is not covered by your warranty. ** Loctite 609 Loctite 609 can be used instead of grease to install the BB cups. Bonding improves the BB shell and cups interface and can also eliminate any creaking that develops. Please follow the Loctite instrcutions if you decide to bond the cups. 7

9 ASYMMETRIC INTEGRATION (Ai) - SI HOLLOWGRAM 6mm 6mm DRIVE & NON-DRIVE SPACER: Please note the location and size of the non-drive and drive side spacers (opposite page) Ai SPIDERS: Specific spiders have been developed for the Ai driveline. They are manufactured to accomodate the 6mm offset present in the frame. Note that the spiders are laser etched on the inside faces with the specific chainring BCD and chainring compatability. 137mm SPINDLE: The 137mm spindle used must be Ai compatible. A compatible Ai spindle will have bearing lands (areas shown shaded )that are 5mm wider than the previous revision 137mm spindle. Older revisions of the 137mm MTN spindle are not Ai compatible, but an Ai compatible spindle will work fine on older 137mm cranksets. RH CRANKARM ASSEMBLY: As evident in the upper illustration, the RH Crankarm, Spider, and Spindale are inserted into the BB as an assembly with the 9mm drive side spacer and bearing shield added beforehand. It is important to apply a high-quality bearing grease to the areas indicated in the lower illustration and also note the application of Loctite 242 (blue) a removable thread locking agent. FD SPACERS: The front derailleur spacers are necessary to move the position of a derailleur outboard. You can see that the spacers attach directly to the frame and the derailleurs are then fitted to the spacers. Please note that the spacers are etched with the type of derailleur. These spacers are available as kits. See Replacement Parts in this supplement. 8

10 PDF DRIVE SPACER SHIELD SHIELD SHIM WAVE WASHER NON-DRIVE SPACER Grease 40 Nm, (30 FtLbs) FIXING BOLT WASHER 9 mm 83mm 0.5mm 14 mm LH CRANKARM EN KP354/ 1X11 5mm CL Offset 76 BCD KP352/ 2X10 5mm CL Offset 104x64 BCD 15.0mm 47.0mm 43.1mm mm 20.0mm DRIVE NON-DRIVE (laser etch) A2 SRAM 1X CL_55.6 (laser etch) 104X mm KP308/ KIT,SPINDLE-SI MTN, 137MM (Spindle only) Grease 40 Nm, (30 FtLbs) Loctite 242 (Blue) 40 Nm, (30 FtLbs) Loctite 242 (Blue) 40 Nm, (30 FtLbs) KT012/ 3/8in drive RH CRANKARM SPINDLE SPIDER KP021/ LOCKRING 9

11 REPLACEMENT PARTS KT013/ QSISEAL/ QSISEAL/ 27.2 SAVE KA054/GRN KA054/BBQ KF103/ DI2 Cable KP349/ KP350/ SIDE SWING FD 69 DOWN SWING FD 72 KP120/BLK KP120/GRN mechanical shifting B A enter DT HYB 2.0 STEERER HEAD TUBE FLANGE SPACING - (Z) LENGTH mm 97 mm mm 110 mm mm 122 mm KT012/ DI2 GUIDE & SCREW A Loctite 242 (blue) 4 Nm (35 InLbs) Loctite 242 (blue) 6 Nm (53 InLbs) A B Z HT LENGTH Date Code 3/8in drive KP021/ Loctite 242 (blue) 40 Nm (30 FtLbs) KP121/ 15mm 20mm B KP351/ DI2 KP054/ KP307/ QC617/ QC618/ C Grease - 40 Nm, (30 FtLbs) KP251/BLK 2X KP354/ 1X11 5mm CL Offset 76 BCD Laser Etch: 137mm Laser Etch: 9mm 2X (PF30) KP197/ KP018/ - ceramic KB6180/ - standard KP352/ 2X10 5mm CL Offset 104x64 BCD KP348/ Seal or A 14 mm 0.5mm Frame serial number location (7-character barcode label) Use this serial number for warranty registration and theft recovery. See your Cannondale Bicycle Owner s Manual for more information on warranty registration. 10

12 PDF FRAME CODE KP347/ KP346/ KP121/ KP348/ KP349/ KP350/ KF024/ KF103/ KP351/ KP054/ DESCRIPTION KIT ROUTING FSI 29ER CRB DI2 KIT ROUTING FSI 29ER CRB MECH SHIFTING KIT,DER.HANGER,FLASH CRB KIT BB CABLEGUIDE FSI 29ER CRB KIT FD MOUNT FSI 29ER CRB SIDE SWING KIT FD MOUNT FSI 29ER CRB DOWN SWING KIT C STAY PROTCTR NEOPRN SM KIT,GUARD,SCUFFGUARD-8PK KIT C-STAY PLATE PROTECT FSI 29ER CRB KIT,GUARD,SCUFFGUARD,DOWNTUBE BOTTOM BRACKET CODE DESCRIPTION KP197/ KIT,BEARING,BB-PF30 KP018/ KIT,BEARING,BB-SI,CERAMIC,2PCS KB6180/ KIT,BEARING,BB-SI,2PCS KP308/ KIT,SPINDLE-SI MTN, 137MM (Spindle only) KP306/ KIT,BB,CDALE SI,68/73X137 BB30/PF30 Ai SPECIFIC (HOLLOWGRAM) CODE DESCRIPTION KP352/ KIT SPIDER SI MTN SRAM 64/104 4-BOLT AI FSI 29 2X10, 5mmCL KP354/ KIT SPIDER SI MTN XX1 AI FSI 29 1X11, 5mmCL KP306/ KIT,BB,CDALE SI,68/73X137 BB30/PF30 STEERER/HEADSET CODE DESCRIPTION KH148/97 KIT STEERERS LOWER 97 FSI 29 KH148/110 KIT STEERERS LOWER 110 FSI 29 KH148/122 KIT STEERERS LOWER 122 FSI 29 QSCSEAL/ KIT,SEAL,UPPER BEARING,60MM OD QSISEAL/ KIT,SEAL,UPPER BEARING,58MM OD HD169/ KIT,BEARINGS, HEADSET - 2 KP058/ KIT,HEADSET,INT HEADSHOK-1 1/8 KP119/ KIT,HEADSET,INT H-SHOK TO 1.5 OPI STEMS Vedi il supplemento LEFTY EN HOLLOWGRAM CODE DESCRIPTION C CRANKSET,SL2,MTB,24/38,170 C CRANKSET,SL2,MTB,24/38,175 C CRANKSET,SL2,MTB,32,170 C CRANKSET,SL2,MTB,32,175 KP246/170L KIT,CRANKARM-SL2 BLK,170 LFT KP246/172L KIT,CRANKARM-SL2 BLK,172 LFT KP246/175L KIT,CRANKARM-SL2 BLK,175 LFT KP246/170R KIT,CRANKARM-SL2 BLK,170 RHT KP246/172R KIT,CRANKARM-SL2 BLK,172 RHT KP246/175R KIT,CRANKARM-SL2 BLK,175 RHT QC617/ KIT,SHIMS-PLASTIC, BB-SI; INCL 5 SHIMS QC618/ KIT,WASHER-WAVE, BB-SI KB6180/ KIT,BEARING,BB-BB30 (SKF#6806-2RS /SRI2 /90% FILL) KP021/ KIT,LOCKRING-SL -REQUIRES KT012/ SEATPOST CODE KP120/BLK KP120/GRN KA054/GRN KA054/BBQ TOOLS CODE KT010/ KT011/ KT012/ KT013/ DESCRIPTION KIT,SEATBINDER,FLASH CRB/BLK KIT,SEATBINDER,FLASH CRB/GRN KIT SEATPOST SAVE F-Si 29 MY15 GRN KIT SEATPOST SAVE F-Si 29 MY15 BBQ DESCRIPTION KIT,TOOL-BB BEARING-SI; KIT,TOOL - BEARING REMOVAL SI; KIT,TOOL-LOCK RING-SI KIT,CRANK EXTRACTION TOOL; 2 PIECES 11

13 MAINTENANCE The following table lists only supplemental maintenance items. Please consult your Cannondale Bicycle Owner s Manual for more information on basic bike maintenance. Consult with your Cannondale Dealer to create a complete maintenance program for your riding style, components, and conditions of use. Follow the maintenance recommendations given by the component manufacturers for the various non-cannondale parts of your bike. ITEM HOUSING AND CABLES - Your bike has been supplied with small adhesive frame protectors - KF103/. Place this material on the the frame between where cables and housing rub due to movement. Overtime, cable rubbing can wear into the frame itself causing very serious frame damage. FREQUENCY BEFORE FIRST RIDE NOTE: Damage to your bike caused by cable rubbing is not a condition covered under your warranty. Also, adhesive frame guards are not a fix for incorrectly installed or routed cables or lines. If you find that applied guards are wearing out very quickly, consult with your Cannondale Dealer about the routing on your bike. DAMAGE INSPECTION - Clean and visually inspect entire bike frame/ swingarm/linkage assembly for cracks or damage. See Inspect For Safety in your Cannondale Bicycle Owner s Manual. CHECK TIGHTENING TORQUES - In addition to other component specific tightening torques for your bike. Tighten according to the TIGHTENING TORQUES information listed in this supplement. BEFORE AND AFTER EACH RIDE EVERY FEW RIDES FORK - Please consult the manufacturer s owner s manual for maintenance information for your fork. WARNING ANY PART OF A POORLY MAINTAINED BIKE CAN BREAK OR MALFUNCTION LEADING TO AN ACCIDENT WHERE YOU CAN BE KILLED, SEVERELY INJURED OR PARALYZED. Please ask your Cannondale Dealer to help you develop a complete maintenance program, a program which includes a list of the parts on your bike for YOU to check regularly. Frequent checks are necessary to identify the problems that can lead to an accident. 12

SCOTT SCALE CARBON BIKE OWNER S MANUAL 2015. www.scott-sports.com

www.scott-sports.com SCOTT SCALE CARBON All rights reserved 2014 SCOTT Sports SA SCOTT Sports SA 17 Route du Crochet 1762 Givisiez Switzerland BIKE OWNER S MANUAL 2015 Distribution: SSG (Europe) Distribution

More information

WWW.SCOTT-SPORTS.COM SCOTT SCALE USER MANUAL 2016

SCOTT SCALE USER MANUAL 2016 All rights reserved 2015 SCOTT Sports SA Distribution: SSG (Europe) Distribution Center SA, P.E.D. Zone C1, Rue du Kiell 60, 6790 Aubange, Belgium v5.1/03082015 WWW.SCOTT-SPORTS.COM

More information

CONTRO-E OWNER S MANUAL SUPPLEMENT

13308 CONTRO-E OWNER S MANUAL SUPPLEMENT Cannondale Supplements This manual is a supplement to your Cannondale Bicycle Owner s Manual. This supplement provides additional and important model specific safety,

More information

VT SERIES. Owners Manual VARIABLE TRAVEL MOUNTAIN BIKE

VT SERIES Owners Manual VARIABLE TRAVEL MOUNTAIN BIKE Multi purpose, Enduro, Trail ride, Light Freeride mountain bike Single pivot, linkage operated rear shock rear suspension Manitou Swinger SPV Air rear

More information

CONGRATULATIONS! TABLE OF CONTENTS. 1 Safety Warnings 2 About Your Wheels 3 Setting Up Your Wheels 7 Care and Cleaning 8 Warranty

WHEEL MANUAL CONGRATULATIONS! Congratulations on your purchase of Oval Concepts Wheels. Developed to perform at a high level, it is important that you follow the operation and maintenance instructions

More information

Depending on which elastic support you have you can secure the V2 power unit to the following seat bracket tubes: EXTERNAL DIAMETER 27.

ASSEMBLY 1 - EPS V2 POWER UNIT (SOLUTION 5) 1.1 - POSITIONING INSIDE THE SEAT TUBE WITH ELASTIC SUPPORT IN THE SEAT BRACKET TUBE Depending on which elastic support you have you can secure the V2 power

More information

Owner s Manual Read and keep this manual. Patents World Wide

Owner s Manual Read and keep this manual. Patents World Wide S & S Industries, Inc., Sarasota, FL, USA www.trail-gator.com Copyright 2008 All Rights Reserved The following manual is provided to assist

More information

PROPER BIKE USE. ATTENTION: Aforementioned checks should be done by the seller during purchase. It s buyers responsibility to control it.

USER MANUAL INTENDED USE This bike has been designed for dirt/street riding. These disciplines concentrate on performing tricks after jumping from a previously prepared jump. Landing takes place on an

More information

SPROCKETS 1 - TECHNICAL SPECIFICATIONS 2 - COMPATIBILITY WARNING!

SPROCKETS 1 - TECHNICAL SPECIFICATIONS 2 - COMPATIBILITY 40 ± 0,1 40,2 + 0,15-0,05 1,8 +0,15 0 1,8 + 0,15-0 1,8 +0,1 0 Ø 43,5 Ø 40 1,4 + 0,1-0 Different combinations from those included in the table could

More information

BAR END SHIFTERS - CURRENT RANGE

BAR END SHIFTERS - CURRENT RANGE 1 - TECHNICAL SPECIFICATIONS 2 - COMPATIBILITY (CURRENT RANGE) (CURRENT RANGE) (CURRENT RANGE) WARNING! Different combinations from those included in the table could cause

More information

ARVINMERITOR UNITIZED FRONT WHEEL HUB INSPECTION AND MAINTENANCE

SERVICE BULLETIN (Also applies to Mack Trucks Australia) NUMBER: SB-423-002 DATE: 8/23/02 MODEL: All with FF981 Front Axle ARVINMERITOR UNITIZED FRONT WHEEL HUB INSPECTION AND MAINTENANCE The ArvinMeritor

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. MOUNTING BRACKET KIT 14 8 7 4 13 5 6 ITEM QTY NAME MATERIAL 1..6..1/2' x 2 1/2' BOLT.. 350099-00 2..2..1/2' x 1 1/2' BOLT.. 350095-00 3..8..1/2' LOCK WASHER.. 350309-00

More information

2006 HEADSHOK Service Video #1

LEFTY SPEED DLR DAMPING CARTRIDGE This document explains how to properly remove, disassemble, inspect, reassemble and reinstall the Lefty Speed DLR2 damping cartridge. It is a document to be used in conjunction

More information

SELF-STEERING AXLE TABLE OF CONTENTS

SELF-STEERING AXLE TABLE OF CONTENTS Section 1 - Introduction Section 2 - Pre-Installation Check List Section 3 - Ride Height Adjustments Section 4 - Suspension Mount Section 5 - Axle Mount Section 6 -

More information

INTRODUCTION KINGPIN REPLACEMENT

KINGPIN REPLACEMENT Author: Randy Baumann All information, illustrations and specifications are based on the best information available at the time of publication. The author cannot guarantee the accuracy

More information

ReadyLift (Part# 66-5075) Strut Extension, Installation Instructions Toyota Tundra New Body Style 2WD & 4WD

SAFETY WARNING: recommends this system be installed by a professional technician. In addition to these instructions, professional knowledge of disassembly/ reassembly procedures and post installation checks

More information

Giant NRS. Model Year. Owners Manual. July 2003.

Giant NRS Model Year 2004 Owners Manual July 2003. Contents. 1. Introduction.. 2 2. Sizing.. 3 3. Exploded view.. 4 4. Rear suspension.. 5 4-1 NRS rear suspension system.. 5 4-2 Bikes equipped

More information

Table of Contents WARNING SYMBOLS AND DEFINITIONS

Table of Contents SAFETY INSTALLATION OPERATION MAINTENANCE Safety.. 2 Specifications.. 4 Installation.. 5 Operation.. 8 WARNING SYMBOLS AND DEFINITIONS Maintenance.. 9 Parts List and Assembly Diagram..

More information

2008 ACCORD - Front Knuckle/Hub/Wheel Bearing Replacement (page 18-13)

2008 ACCORD - Front Knuckle/Hub/Wheel Bearing Replacement (page 18-13) Exploded View Special Tools Required Ball joint remover, 28 mm 07MAC-SL0A202 Hub dis/assembly tool 07GAF-SD40100 Bearing driver attachment,

More information

WARNING! WARNING! ENGLISH 18 ENGLISH

SKELETON RAKES Carefully read, follow and understand the instructions given in this manual. It is an essential part of the product, and you should keep it in a safe place for future reference. MECHANIC

More information

1. Lay out 2 pieces of 7/8' tubing and mark for bending as shown. Remember that the bend is in the shaded area as shown below in Figure 1.

MINI BIKE PLANS Page 1 INTRODUCTION Before starting to build your Mini-Bike, be sure that you have all the parts shown on the material list. You will note that tubing has been used in the construction.

More information

16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1

16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1 BD Adjustable Track Bar w/bracket Dodge 2500-3500 4WD Models 1994-2002 Dodge 1500 4WD Model 1994-2001 P/N# 1032011-F

More information

H EAD TUBE BASICS. Figure 1 - Head tube, front fork and hardware

H EAD TUBE BASICS Figure 1 - Head tube, front fork and hardware This tutorial will cover some of the basics you need to know when pulling apart the steering system of a bicycle for repair or use on one

More information

DETACHABLE WINDSHIELD AND DOCKING HARDWARE KIT

-J00 REV. 00-- DETACHABLE WINDSHIELD AND DOCKING HARDWARE KIT GENERAL Kit Number -A, 0-, -, 0-, -, - 0, -0 Models These kits fit and later FXST, FXSTB, FXSTC, and and later FXDWG Harley-Davidson model

More information

NINER ENCYCLOPEDIA >> SPECIFICATION & SETUP GUIDE

Your one-stop reference for all Niner Bikes technical information, setup guides, warranty and related data. WELCOME TO THE BIG REVOLUTION! Call me Ishmael. Ha, just kidding. This is your complete guide

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 6 13 11 MOUNTING BRACKET KIT Cable Tab 14 12 7 15 9 Cable Tab 360-896-0407 fax 360-735-9300 www.roadmasterinc.com ITEM

More information

ASSEMBLY MANUAL SE-4S35

Automatic drive ASSEBLY ANUAL SE-4S35 AI-4S35 SG-4R35 Battery box otor unit Inter-4 hub CONTENTS WARNING 1 INSTALLATION CONITIONS Battery box Speed sensor Cable lengths and diameters otor unit Recommended

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. MOUNTING BRACKET KIT 12 3 6 9 5 11 ITEM QTY NAME MATERIAL 1..4..1/2' x 1 1/2' BOLT.. 350095-00 2..4..1/2' x 1 1/2' CARRIAGE BOLT.. 350362-00 3..8..1/2' NUT.. 350258-00

More information

MANDATORY SERVICE BULLETIN

652 Oliver Street Williamsport, PA 17701 U.S.A. Tel. +1-800-258-3279 (U.S. and Canada) Tel. +1-570-323-6181 (International) Fax. +1-570-327-7101 www.lycoming.com MANDATORY SERVICE BULLETIN DATE: October

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 12 10 3 11 4 5 13 7 8 360-896-0407 fax 360-735-9300 www.roadmasterinc.com ITEM QTY NAME MATERIAL 1.. 4..1/2 x 1 1/2

More information

XL PREMIUM OIL COOLER KIT

-J05 REV. 0-0-0 XL PREMIUM OIL COOLER KIT GENERAL Kit Number 0008 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English

More information

AKRAPOVIC SLIP-ON EXHAUST SYSTEM for the HONDA CB1000R

Installation instructions: *502131* AKRAPOVIC SLIP-ON EXHAUST SYSTEM for the HONDA CB1000R Congratulations on purchasing an Akrapovic exhaust system. Please read these installation instructions carefully.

More information

WWW.TECH-MAVIC.COM CONTENTS WWW.TECH-MAVIC.COM

Technical Manual 2011 2011 WWW.TECH-MAVIC.COM 2 CONTENTS 03 WWW.TECH-MAVIC.COM 04>26 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 MAVIC WHEELS io TRACK 11 COMÈTE TRACK 11 ELLIPSE

More information

FL ADJUSTABLE RIDER BACKREST MOUNTING HARDWARE KIT

-J070 REV. 0-0-0 FL ADJUSTABLE RIDER BACKREST MOUNTING HARDWARE KIT GENERAL Kit Number 9-09A Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com

More information

Rating when used as a weight carrying hitch without spring bars:

BOLT-TOGETHER WEIGHT DISTRIBUTING HITCH SYSTEM Rating when used as a weight distributing hitch with spring bars: Part Number 48051 4805 48053 48054 Max Tongue Weight 550 Ibs. 750 Ibs. 1000 Ibs. 1400 lbs.

More information

FREESTYLE BMX BIKE FREESTYLE BIKE. Assembly Manual. Important Please read these instructions fully before starting assembly 402/9764 391/5116

FREESTYLE BMX BIKE ssembly Manual FREESTYLE BIKE 402/9764 391/5116 Important Please read these instructions fully before starting assembly These instructions contain important information that will help

More information

FJ2. 2 Ton Trolley Floor Jack Assembly & Operating Instructions

FJ2 2 Ton Trolley Floor Jack Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.

More information

2006 JUDY SERVICE GUIDE

2006 JUDY SERVICE GUIDE For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com. Information contained in this publication is subject

Cannondale Hollowgram Si Sl Crankset Manual Transmission More information

For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com.

For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com. Information contained in this publication is subject to change at anytime

More information

Drive shaft, servicing

Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,

More information

Procedures and Intervals to Inspect the Wheel Ends and Tighten the Spindle Nuts on Meritor TL Series Trailer Axles with Unitized Wheel Ends

Technical Bulletin Revised 1 Technical 02-11 Bulletin Revised 02-11 Procedures and Intervals to Inspect the Wheel Ends and Tighten the Spindle Nuts on Meritor TL Series Trailer Axles with Unitized Wheel

More information

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12' DUAL BEVEL COMPOUND MITER SAW B27A

PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510

More information

STEERING HANDLEBAR/FRONT WHEEL/ FRONT SHOCK ABSORBER

14 14 STEERING HANDLEBAR/FRONT WHEEL/ SCHEMATIC DRAWING ------------------------------------------------- 14-1 SERVICE INFORMATION------------------------------------------------ 14-2 TROUBLESHOOTING-----------------------------------------------------

More information

NINER ENCYCLOPEDIA >> SPECIFICATION & SETUP GUIDE

Your one-stop reference for all Niner Bikes technical information, setup guides, warranty and related data. CONTENTS WELCOME 3 COMPLETE NINER LINEUP 4 GEOMETRY PHILOSOPHY & BASIC INFO 7 FRAME CARE & MAINTENANCE

More information

C10 ultra high-modulus aero carbon tubing, integrated seat clamp, integrated head tube, water bottle mount

18 24 3081 Norcom Straight - Matt Reed Edition Sizes Color(s) Matte Carbon Main frame Rear triangle Fork Crankset Bottom bracket Pedals Front Derailleur Rear Derailleur Shifters Cassette Chain Wheelset

More information

Char-Lynn Spool Valve Hydraulic Motors. Repair Information. W Series Geroler Motors

Char-Lynn Spool Valve Hydraulic Motors Repair Information W Series Geroler Motors with Parking Brake 004 Nut Key Ring, Retaining Bearing Ring, Retaining Ring, Retaining Washer (Thick), Pressure Washer,

More information

.1.2. .3.4. .5.6. .7.8.

.1.2.3.4.5.6.7.8. .9.10.11.12.13.14.15.16.17. MANITOU SUSPENSION FORKS CONGRATULATIONS ON CHOOSING A 2003 MANITOU AXEL FORK. This Manitou AXEL fork is fully assembled and ready to be installed

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 8 7 1 6 15 28 1 2 '± 1 2 ' MOUNTING BRACKET KIT 3 2 10 14 4 5 9 360-896-0407 fax 360-735-9300 www.roadmasterinc.com Item

More information

ELECTRIC BICYCLE USER MANUAL

ELECTRIC BICYCLE USER MANUAL 1 Main Technical Parameters and Specification Weight: 23 kg Wheel size: 20 Maximum speed: 25 km/h E BIKE URBAN Range: Up to 45km (with pedal assist) Type: lithium Voltage:

More information

Spicer Axles & Brakes ABIB-0302

Information Bulletin Bulletin Type: Parts / Service Information Topic: Dana LMS Hub Assembly Procedure Steer and Drive Axles Spicer Axles & Brakes ABIB-0302 Note: Bulletin ABIB-0302 replaces the original

More information

n Rear Derailleur Shimano XTR Di2 Scalpel 29, 100mm, BallisTec Hi-MOD Carbon, Zero Pivot seatstay, PF30, o Shifters Shimano XTR Di2

CM2272 Scalpel 29 Carbon Black Inc. x Exposed Matte Carbon w/ Gloss Jet Black and Silver pin striping (02) - BLE Lefty Carbon XLR 100 29, XLR XC damper (Full Sprint), Hybrid Needle Bearing Technology,

More information

Headset, handlebar, seat and seat post area

All figures in the table below are inch-pound. Note that some companies do not specify torque for certain components or parts. Contact the manufacturer for the most up to date specifications. Headset,

More information

Product Notice. Safety Notice: Sales Hold

Product Notice Ariens Company 655 W. Ryan St. Brillion, WI 54110 www.ariens.com Product Family: Ariens and Gravely 36 Power Brushes Subject: Sales Hold Inspect and Repair Dealer Action: SALES HOLD Do not

More information

RACING ZERO RACING ZERO NITE RACING ZERO CARBON

WHEELS RACING ZERO RACING ZERO NITE RACING ZERO CARBON USER S MANUAL Carefully read, follow and understand the instructions given in this manual. It is an essential part of the product, and you should

More information

OWNER S MANUAL Table Tennis Table Patent Pending

OWNER S MANUAL Table Tennis Table Patent Pending Be sure to write your model number and serial number here for future reference. You can find these numbers printed on the bottom of the table. MODEL # T8179

More information

AXLE SHAFTS - FRONT. 1998 Pontiac Bonneville MODEL IDENTIFICATION DESCRIPTION & OPERATION TROUBLE SHOOTING REMOVAL & INSTALLATION

AXLE SHAFTS - FRONT 1998 Pontiac Bonneville 1998-99 DRIVE AXLES FWD Axle Shafts - Cars - 'C', 'G' & 'H' Bodies GM Aurora, Bonneville, Eighty Eight, LeSabre, LSS, Park Avenue, Regency, Riviera MODEL IDENTIFICATION

More information

PEDAL CAR - GO CART ASSEMBLY & OPERATING INSTRUCTIONS

PEDAL CAR - GO CART 42822 ASSEMBLY & OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com Copyright 2000 by Harbor Freight Tools. All

More information

TABLE OF CONTENTS. Section 1 - Assembling your new pit bike.

Orion Pit Bike Sales Owners Manual (All information and content is the property of Orion Pit Bike Sales. Any attempt to copy or resell is a direct violation of our copyright. All violators will be prosecuted)

More information

SCREAMIN' EAGLE 'HEAVY BREATHER' PERFORMANCE AIR CLEANER KIT

REV. 05-04- SCREAMIN' EAGLE 'HEAVY BREATHER' PERFORMANCE AIR CLEANER KIT GENERAL Kit Numbers 95-08B, 9006-09B, 876-0A Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories

More information

Installation Instructions GOOSENECK MOUNTING KIT Chevrolet/GMC 1500/2500/3500 All except 4-door Crew-Cab

GOOSENECK MOUNTING KIT Equipment Required: Fastener Kit: F Wrenches: 3/4, 7/8, 15/16 Drill Bits: 1/4 Other Tools: Drill WARNING: Under no circumstances do we recommend exceeding the towing vehicle manufacturers

More information

BILLET HEADLAMP WITH SHORT/TALL MOUNTS

-J099 REV. 00-0- BILLET HEADLAMP WITH SHORT/TALL MOUNTS GENERAL Kit Number 9-0, 9-0 Models Kit 9-0 is a -/ inch headlamp and kit 9-0 is a -/ inch headlamp. Both kits will fit the models listed in Table.

More information

Corvette Hub/Bearing Adapter Installation Manual 4th-Gen F-body

Corvette Hub/Bearing Adapter Installation Manual 4th-Gen F-body This manual covers the installation of our Corvette hub adapter, used with 98+ (LS1 style) Camaro and Firebird spindles. The adapter will

More information

SCALPEL 29 ER. OWNER S MANUAL SUPPLEMENT.

XXXXXXX 127838 SCLPEL 29 ER. OWNER S MNUL SUPPLEMENT. 127838.PDF SFETY INFORMTION bout This Supplement Cannondale Owner s Manual Supplements provide important model specific safety, maintenance, and technical

More information

INSTRUCTIONS. FLHR/C/S (Road King) FRONT END LOWERING KIT 1WARNING -J03242 REV. 10-19-04. General. Removal (Left and Right Forks) Kit Number 54614-05

INSTRUCTIONS -J04 REV. 0-9-04 General FLHR/C/S (Road King) FRONT END LOWERING KIT This kit is designed for installation on 00 and later FLHR/C/S Model Motorcycles. Road King models use the conventional

More information

SAFETY & OPERATING INSTRUCTIONS

SAFETY & OPERATING INSTRUCTIONS EDLUND TOMATO LASER, Models ETL -316, -140 & -380 READ AND UNDERSTAND THIS MANUAL AND ALL INSTRUCTIONS BEFORE OPERATING THIS SLICER. 159 Industrial Parkway, Burlington,

More information

GENUINE PARTS INSTALLATION INSTRUCTIONS

GENUINE PARTS INSTALLATION INSTRUCTIONS DESCRIPTION: Illuminated Kick Plate APPLICATION: Rogue (2011) PART NUMBER: 999G6 GX010 KIT CONTENTS: Item A B C G H QTY 1 1 1 D 1 E 1 F 3 15 6 Description Kick Plate,

More information

Rebuild Instructions for 70001 and 70010 Transmission

Rebuild Instructions for 70001 and 70010 Transmission Brinn, Incorporated 1615 Tech Drive Bay City, MI 48706 Telephone 989.686.8920 Fax 989.686.6520 www.brinninc.com Notice Read all instructions before

More information

MUSTANG II IFS COMPLETE PARTS PACKAGE

MUSTANG II IFS COMPLETE PARTS PACKAGE Your Southern Rods & Parts Mustang II IFS Parts Package contains the following items: 1 pr) Upper Control Arms (2023) 1) Upper Arm Bolt Kit (MP-001-A) 1 pr) Lower

More information

MY10 XX GEN.0000000002866

MY10 XX Technical Manual GEN.0000000002866 SRAM LLC Warranty EXTENT OF LIMITED WARRANTY SRAM warrants its products to be free from defects in materials or workmanship for a period of two years after original

More information

CUSTOM AUXILIARY FORWARD LIGHTING KIT

-J0 REV. 0--0 CUSTOM AUXILIARY FORWARD LIGHTING KIT GENERAL Kit Number -0, 0000 Models This Custom Auxiliary Lighting Kit adds lamps and turn signals to 00 and later FLHX model motorcycles. Additional

More information

DANA 30 MANUAL HUB CONVERSION KIT

DANA 30 MANUAL HUB CONVERSION KIT 12194 PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE YOU BEGIN Your safety and the safety of other motorists is very important. Your Jeep is an off road capable vehicle

More information

Auto-belay Cable Replacement Process

Auto-belay Cable Replacement Process Version 2.00 WARNING: The air pressure in the auto-belay system is what causes the cable to be retracted when releasing the cable or climbing the wall with the cable

More information

BILLET HEADLAMP SHELL

-J008 REV. 007-07- BILLET HEADLAMP SHELL GENERAL Kit Number 770-0 Models For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories section of www.harleydavidson.com

More information

SLACK PERFORMANCE KARTS

SLACK PERFORMANCE KARTS SET UP GUIDE Thank you for purchasing a 2013 Slack Axiom Chassis. Performance Mfg. strives to provide you with the very best chassis and components on the market today. Your satisfaction

More information

Strut Spring Compressor

Strut Spring Compressor Item 43753 Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. When unpacking, make sure that the product is intact and

More information

..and for choosing Rocker BMX, you have chosen wisely. We appreciate the market is slightly clouded with various brands of so called mini bmx.

..and for choosing Rocker BMX, you have chosen wisely. We appreciate the market is slightly clouded with various brands of so called mini bmx. However, Rocker is very different from other brands; it was

More information

In-Ground Basketball System Owners Manual

In-Ground Basketball System Owners Manual Customer Service Center N53 W4700 South Corporate Circle Sussex, WI 53089 U.S.A. Write Model Number From Box Here: WARNING! 3 Capable Adults REQUIRED TOOLS AND

More information

SCREAMIN' EAGLE 'HEAVY BREATHER' PERFORMANCE AIR CLEANER KIT

REV. 2015-04-23 SCREAMIN' EAGLE 'HEAVY BREATHER' PERFORMANCE AIR CLEANER KIT GENERAL Kit Numbers 29299-08, 29098-09 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 16 6 18 Cable Tab 13 15 8 10 2 Cable Tab 1 11 9 17 14 360-896-0407 fax 360-735-9300 www.roadmasterinc.com ITEM QTY NAME

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. 6 28 1 2 'ā 1 2 ' 4 8 ITEM QTY NAME PART # 1..4..1/2 x 1 1/4 BOLTS.. 350094-00 2..4..1/2 LOCK WASHER.. 350309-00 3..4..1/2 HEX NUT.. 350258-00 4..2..SPACER PLATE..

More information

Ford F-250 / 350 2-1/2 Coil Kit. Ford F-250, F350 2011-2015. Part#: 013255

Part#: 013255 Ford F-250 / 350 2-1/2 Coil Kit Ford F-250, F350 2011-2015 Rev.040815 491 W. Garfield Ave., Coldwater, MI 49036. Phone: 517-279-2135 Web/live chat: www.bds-suspension.com. E-mail: [email protected]

More information

For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com.

For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com. 2 0 0 5 D U K E A I R X C / S L / R A C E S E R V I C E G U I D E Information

More information

LEFTY HYBRID. OWNER S MANUAL SUPPLEMENT.

129143 LEFTY HYBRID. OWNER S MANUAL SUPPLEMENT. In this supplement, particularly important information is presented in the following ways: WARNING Indicates a hazardous situation which, if not avoided,

More information

12. REAR WHEEL/BRAKE/SUSPENSION

12 12 12-0 SERVICE INFORMATION.. 12-1 REAR BRAKE.. 12-5 TROUBLESHOOTING.. 12-2 REAR SHOCK ABSORBER.. 12-8 REAR WHEEL.. 12-3 REAR FORK.. 12-9 SERVICE INFORMATION GENERAL INSTRUCTIONS When installing

More information

Fire Pump Applications

Fire Pump Applications Installation & Maintenance Manual Universal Joint Driveshafts www.cumminsfirepower.com Table of Contents Section 1 General 1.1 Introduction 1.2 Safety Precautions 1.3 Warranty Statement

More information

Front brakes (FN- 3), servicing

j a t Front brakes (FN- 3), servicing 46-1 Front brakes, servicing Note: Install complete repair kit. After replacing brake pads and before moving vehicle, depress brake pedal several times firmly to properly

More information

WARNING TO END USER, INSTALLER AND SELLER OF THIS PART!

WARNING TO END USER, INSTALLER AND SELLER OF THIS PART! By installing this part you are accepting full responsibility and liability for proper wheel and tire fitment after installation. It is the installer

More information

DYNA RIDER FOOTBOARD KIT

-J0 REV. 0-0-0 DYNA RIDER FOOTBOARD KIT GENERAL Kit Number 000 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. 11 10 20 12 4 18 19 1 2 13 16 ITEM QTY NAME MATERIAL 1..2.. 1/2' x 3 1/2' BOLT.. 350103-00 2..2.. 1/2' x 2' BOLT.. 350097-00 3..6.. 1/2' x 1 1/2' BOLT.. 350095-00 4..2..

More information

ASSEMBLY DIAGRAM AND ASSEMBLY REFERENCE ULTIMA OLD SCHOOL 2 EVO & TC BELT DRIVE UNITS

ASSEMBLY DIAGRAM AND ASSEMBLY REFERENCE ULTIMA OLD SCHOOL 2 EVO & TC BELT DRIVE UNITS BELT DRIVE ASSEMBLIES Part# 58-850 2 Old School Belt Drive Assembly - Polished Part# 58-851 2 Old School Belt Drive

More information

HYBRID CAM PLATE AND HIGH VOLUME OIL PUMP KIT

-J056 REV. 0-05-0 HYBRID CAM PLATE AND HIGH VOLUME OIL PUMP KIT GENERAL Kit Number 584- Models For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com

More information

»Product» Safety Warning

C1200 Installation Instructions 2007-2016 Chevy/GM 1500 2/4wd 2' Strut Spacer Lift Read and understand all instructions and warnings prior to installation of product and operation of vehicle. Zone Offroad

More information

SCOTT BMX BIKE OWNER S MANUAL 2015. www.scott-sports.com

www.scott-sports.com SCOTT BMX All rights reserved 2014 SCOTT Sports SA SCOTT Sports SA 17 Route du Crochet 1762 Givisiez Switzerland BIKE OWNER S MANUAL 2015 Distribution: SSG (Europe) Distribution Center

More information

6 inch A-Arm Lift Kit WARNING: 16-018/16-019. installation instructions. will fit CLUB CAR DS. included:

Revised May 205 6-08/6-09 6 inch A-Arm Lift Kit will fit CLUB CAR DS installation instructions included: Rear Lift Blocks Main Suspension Assembly Spindles A-Arms Rear Shock Mounting Plates U-Bolts WARNING:

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 4 MOUNTING BRACKET KIT 1 2 3 360-896-0407 fax 360-735-9300 www.roadmasterinc.com ITEM QTY NAME PART # 1..2.. #10 x

Cannondale Hollowgram Chainring

More information

CHROME FRONT BRAKE MASTER CYLINDER KIT

-J075 REV. 009-0-0 CHROME FRONT BRAKE MASTER CYLINDER KIT GENERAL Kit Number 5-99D, 5-99D Models These Chrome Master Cylinder Kits are designed to replace the original equipment front brake master cylinder

More information

Bicycoo BMX Instruction Manual 0014X Series

Bicycoo BMX Instruction Manual 0014X Series Joovy 2919 Canton Street Dallas, TX 75226 (877) 456-5049 Fax: (214) 761-1774 Email: [email protected] Web Site: www.joovy.com ! WARNINGS Please read

More information

FOR ANY QUESTIONS, PLEASE CALL US @ 727.347.9915 M-F 8:00a.m.-8:00p.m. EST. REAR BRAKES 1 AEROSPACE COMPONENTS 727.347.9915

REAR BRAKES 1 AEROSPACE COMPONENTS 727.347.9915 REAR BRAKES Before getting started, remove all stock braking components. Pre-assembly of parts: Clean the bolts and the threads in the hat with acetone.

More information

Dive Rite 200 & 300 Bar Isolator Manifold Service Manual

Dive Rite 200 & 300 Bar Isolator Manifold Service Manual Principal Photography and Text by Pete Nawrocky Copyright 2003 Lamartek Inc. D/B/A Dive Rite 0 Warning This manual is only to be used as a guide

More information

Title: Best Practices Removal and Installation of Wheel Assembly (Tire Mounted to Rim Assembly) From Container Chassis

INSTITUTE OF INTERNATIONAL CONTAINER LESSORS IICL Chassis Technical Bulletin CTB 021, February 12, 2015 Title: Best Practices Removal and Installation of Wheel Assembly (Tire Mounted to Rim Assembly) From

More information

    Did you mean: cannondale sisl crankset (14 items)?

  • Cannondale Hollowgram SI 172.5mm Mountain Bike Crankset - MTB & Road Crank

    Pre-Owned
    From United States
    or Best Offer
    Customs services and international tracking provided
    21 Watching
  • Cannondale Hollowgram SL 170mm Mountain Bike Crankset - MTB Crank

    Pre-Owned
    From United States
    or Best Offer
  • Cannondale SI Mountain Bike Bicycle Crankset BB30 36/26 cnc rings

    New (Other)
    From United States
    Buy It Now
  • Cannondale Hollowgram Si Crankset with OPI Spidering 50/34T 175mm BB30/PF30

    Pre-Owned
    From United States
    or Best Offer
    Customs services and international tracking provided
  • New Cannondale Hollowgram Si Crankset BB30 Spindle 165mm Crank w/ Spider Black

    New (Other)
    Top Rated Plus
    Buy It Now
    From United States
    18 Watching
  • CANNONDALE HOLLOWGRAM SI 175 CRANKSET Race Face Chainring 24/34/46 NICE CND

    Pre-Owned
    Top Rated Plus
    or Best Offer
    From United StatesCustoms services and international tracking provided
  • Cannondale hollowgram SL CRANKSET 175MM 39-26 10 speed

    Pre-Owned
    From United States
    Buy It Now
  • Cannondale Hollowgram Si Crankset BB30 w/FSA 52/36 Mid-Compact 175mm

    New (Other)
    From United States
    or Best Offer
    13 Watching
  • NEW Cannondale Hollowgram Si 52/36 172.5mm Road Bike Crankset Black

    New (Other)
    From Ukraine
    or Best Offer
    13 Watching
  • Fat Bike Crank Cannondale Si BB30 Fat Bike Crankset 30T 170mm for 9-11 Speed

    New (Other)
    From China
    or Best Offer